IPB

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> MK1/MK2 Exhaust
Michaelc5086
post 12th July 2017 06:57
Post #1 | Print


1.3 8v
*

Group: Member
Posts: 23
Joined: 23rd May 2016
Local Time: 12th December 2017 18:58
Member No.: 12,697
Driving: Alfa 145 cloverleaf
From: Huddersfield



Good morning all!

Could any body tell me if there is any difference between a Mk1 and MK2 exhaust from the CAT backwards? First thing is the CAT may have a different connection (sleeved rather than flanged). But is there any difference in the alignment or hanger locations?

Cheers guys
Go to the top of the page
View Vehicles
+Quote Post
langers
post 12th July 2017 18:17
Post #2 | Print


Forum Moderator
******

Group: Moderator
Posts: 5,450
Joined: 14th April 2008
Local Time: 12th December 2017 17:58
From: Lincoln
Member No.: 3,059
Driving: Audi A3 Sportback S-Line 1.4 TFSI COD
From: Lincoln



Everything is the same apart from a 3 bolt triangular flange in the phase 1....then changed to sleeve onwards.


--------------------

'96 Purple 145 QV died from rust - '98 Blue Junior SOLD - '99 Red 145 QV 20VT SOLD - '97 145 QV Track Tart SOLD
Go to the top of the page
View Vehicles
+Quote Post
Ganz
post 18th July 2017 22:30
Post #3 | Print


1.6 8v
***

Group: Regular
Posts: 766
Joined: 2nd November 2012
Local Time: 12th December 2017 17:58
From: East Mids
Member No.: 10,640
Driving: 145 Cloverleaf 2.0L ts
From: uk



QUOTE(langers @ 12th July 2017 19:17) *
Everything is the same apart from a 3 bolt triangular flange in the phase 1....then changed to sleeve onwards.


Agreed


--------------------
G A N Z 145

Instagram
ganz145_alfa
Go to the top of the page
View Vehicles
+Quote Post

Reply to this topicStart new topic

 



- Lo-Fi Version Time is now: 12 Dec 2017 17:58