IPB

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Pistons, Which pistons could be used?
zanetti
post 25th October 2017 12:44
Post #1 | Print


1.3 8v
*

Group: Member
Posts: 81
Joined: 29th June 2005
Local Time: 17th July 2018 19:00
Member No.: 984
Driving: 155 Skinny 2.0 16v Twinny
From: South Africa



Hi everyone,

So I was wondering if anyone has ever user 147 pistons in their cf1/cf2? Part 60661000, any experience with this?

I know the rings are different, 1.2 vs 1.5 etc...

Thanks for any input!
Go to the top of the page
View Vehicles
+Quote Post
Antonio
post 25th October 2017 23:02
Post #2 | Print


1.3 8v
*

Group: Member
Posts: 65
Joined: 29th November 2015
Local Time: 17th July 2018 19:00
From: Spain
Member No.: 12,458
Driving: 146 Boxer 16v, 146 Ti Fl, 145 Qv Fl
From: Spain



Piston to deck height is different as the headgasket between CF1/CF2 and CF3 is different, much thicker on the old ones..

I don't know if both blocks have the same height, if they are the same, you can fit 147 piston using the latter multi-layer headgasket found on CF3 engines..


Hope I've helped blush.gif
Go to the top of the page
View Vehicles
+Quote Post
zanetti
post 26th October 2017 04:51
Post #3 | Print


1.3 8v
*

Group: Member
Posts: 81
Joined: 29th June 2005
Local Time: 17th July 2018 19:00
Member No.: 984
Driving: 155 Skinny 2.0 16v Twinny
From: South Africa



QUOTE(Antonio @ 26th October 2017 01:02) *
Piston to deck height is different as the headgasket between CF1/CF2 and CF3 is different, much thicker on the old ones..

I don't know if both blocks have the same height, if they are the same, you can fit 147 piston using the latter multi-layer headgasket found on CF3 engines..
Hope I've helped blush.gif


Thanks, yes I did notice the height difference, Iím assuming this is to allow for the use of the mls gasket.

I will see if I can check the block height.

Thanks!
Go to the top of the page
View Vehicles
+Quote Post

Reply to this topicStart new topic

 



- Lo-Fi Version Time is now: 17 Jul 2018 17:00