Posted by: Ganz 14th April 2019 21:59
QUOTE(STEVIE BOY @ 8th April 2019 21:14)
How do I remove the abs sensor, is that supposed to be an Allen nut? Need to get a clear approach to bottom pinch nut.
With great difficulty
My Allen bolt snapped off. I drilled through the remaining bit and then proceeded to lever the abs sensor off with a hefty screwdriver. It was seized solid! Even with no Allen bolt holding it on it would not budge. I ended up cracking the iron plate it was attached to!! In the end I ended up drilling into the abs sensor and scraping all the bits out. Nightmare it was