IPB

Welcome Guest ( Log In | Register )

> Oil pump removal nightmare
Pantera
post 4th November 2019 18:22
Post #1 | Print


1.3 8v
*

Group: New Member
Posts: 16
Joined: 30th March 2015
Local Time: 28th January 2020 23:51
Member No.: 12,139
Driving: Alfa Romeo 145Q
From: Argntina



Hi Guys.
On the weekend I've tried with no success to remove the oil pump in my 145. I have to change it because of low oil pressure in all the range.
The oil pressure is not ultra low, but as I have an external oil pressure on the dashboard I've noticed that in three months the oil went from 22 psi idle to 14 psi idle and it worries me that it became lower than that.

So, went for it and all went fine until the crankcase pulley removal. The bolt is so tight I couldn't undo it no matter how much force I applied. With a breaker bar and an extension to gain more leverage still couldn't do it.
Do you have some tips to tell me to help me undo this goddamn bolt? The car is not rusted and all the other parts and quite fine. I have read that the bolt is torqued down to 38 kgm so I know I will need to apply a lot of force to break in.

Thank you.
Go to the top of the page
View Vehicles
+Quote Post

Posts in this topic


Reply to this topicStart new topic

 



- Lo-Fi Version Time is now: 29 Jan 2020 02:51