IPB

Welcome Guest ( Log In | Register )

> Bumper Removal, Front bumper
alfatom
post 31st May 2006 12:44
Post #1 | Print


1.4 16v
**

Group: Regular
Posts: 133
Joined: 12th April 2006
Local Time: 23rd August 2019 22:09
Member No.: 1,447
Driving: Alfa Romeo 145 QV - titanium grey with black momo
From: London



Hi Guys...
I am going to fit the resonator replacement pipe this weekend and as a bit of prep I thought I would just check with you knowledgeable guys as to how long it may take to remove the bumper and where the clips are. blink.gif

Is the bumper 1 peice or can you remove the bottom half in order to get the resonator out?
Are the clips reasonably tough and designed to be removed and replaced or are they just bolts?
Where are the bolts that I need to remove to get the bumper off.
Do you have any other hints and tips for this job?

I have had a look at the photos that are on the forum showing the change of part but the bumper is already off in the shots....

I am also going to do an oil change and fit the K&N panel filter - should have the alfa growl back by the weekend! woohoo. biggrin.gif
Go to the top of the page
View Vehicles
+Quote Post

Posts in this topic
alfatom   Bumper Removal   31st May 2006 12:44
GialloEvo94   It's fairly easy... 1) Remove grille (bolts o...   31st May 2006 12:56
alfatom   Thanks very much for the guidance. I look forwar...   31st May 2006 13:57
GialloEvo94   Well I finally got the screws connecting the whee...   3rd June 2006 19:24
raudio   Well I finally got the screws connecting the wheel...   16th December 2015 21:04
F355   It's never straightforward is it :D Hopefully...   3rd June 2006 20:18
alfatom   GialloEvo.... Looks like you are having a nightmar...   5th June 2006 08:59
GialloEvo94   :P (but well done :D) I've been unable to so...   5th June 2006 09:38
GialloEvo94   Finally, over a month after starting the job and t...   2nd July 2006 23:08
alfatom   Well done GE!!! Sometimes these jobs a...   3rd July 2006 07:18
greencloverleaf pat   how much was the replacment filter and also what i...   15th July 2006 18:10
GialloEvo94   how much was the replacment filter and also what i...   15th July 2006 22:52
greencloverleaf pat   i think i will get the air filter also .   16th July 2006 07:56
GialloEvo94   I got my K&N filter from the same place I got ...   16th July 2006 08:37
greencloverleaf pat   ok thanks mate   16th July 2006 10:04
ToxyMaTT   Replacement pipe was 3 from Alfa (part number 606...   29th September 2013 10:34
GialloEvo94   Is this the JTD pipe ? I saw this when I took a lo...   29th September 2013 11:26
ToxyMaTT   Replacement pipe was 3 from Alfa (part number 606...   1st October 2013 15:08
GialloEvo94   JTD pipe looks like nearly the same, what do you t...   1st October 2013 16:24
jonmns77   well just finished mine off, it took about 3 hours...   1st June 2008 15:49
GialloEvo94   please note i could not find any screws underneath...   1st June 2008 17:18
jonmns77   There are definately screws underneath the bumper ...   1st June 2008 18:17
ohit   Does the front bumper HAVE to come off to fit the ...   10th January 2010 11:58
langers   The corner of the bumper does in order to bend it ...   10th January 2010 12:31
ToxyMaTT   Thx for your answer ! ;) So ... all sold out...   29th September 2013 12:10
simon88wilson   See post #2 on this thread: http://forum.alfa145.c...   29th September 2013 14:19


Reply to this topicStart new topic

 



- Lo-Fi Version Time is now: 23 Aug 2019 20:09