IPB

Welcome Guest ( Log In | Register )

> Fitting modern parts
malfarati
post 10th January 2016 21:00
Post #1 | Print


1.3 8v
*

Group: Member
Posts: 33
Joined: 28th February 2015
Local Time: 29th February 2020 04:54
From: Southampton
Member No.: 12,089
Driving: Skoda Octavia
From: Southampton



Hi All,

Chatting to a mate today about my 1.8TS project and he came up with an idea that could make a lot of sense.

With the availability of replacement and spare parts becoming more and more difficult, he suggested I use the parts off a modern Alfa say a 147 or Mito and fit them to my 145, making replacement parts easier to source in the future.

The main plan was to substitute the suspension struts, wheel hubs, discs and calipers all round, and driveshafts (if they fit).

Anyone know if this is possible or not, or can suggest an alternative solution?

Thanks.

This post has been edited by malfarati: 10th January 2016 21:02
Go to the top of the page
View Vehicles
+Quote Post

Posts in this topic


Reply to this topicStart new topic

 



- Lo-Fi Version Time is now: 29 Feb 2020 04:54