Great info. Thank you!!!
I have now an aftermarker oil temperature gauge so I will try to find the adapter to connect it to.
For the oil pressure I've used the bolt fitting on the top of the cylinder head. I have read that it's more accurate to read low pressure values because as it's on the top, if you have oil there you will have it in all your system, but for the temperature it's not a good place.
Later I will post some pictures on the oil pressure sensor and th elocation and will try to find the m18 fitting.
Thank you again!!!
Powered by Invision Power Board (http://www.invisionboard.com)
© Invision Power Services (http://www.invisionpower.com)